What pool settings should I use on a Lucky Miner?

By DirectPool. Published . Updated
Short answer

For DirectPool shared Bitcoin mining, set Stratum Host to stratum.directpool.io, Port to 3333, Username to your BTC address plus .workername, and Password to x. Save, restart, and check accepted shares on the miner and your address dashboard.

What goes in each pool field?

Use your own Bitcoin receiving address, not a BCH address or an exchange account name. Append a short worker label such as .lucky01 to distinguish this machine. The example below is a placeholder, not a valid payout address.

FieldWhat to enter for DirectPool
Stratum Hoststratum.directpool.io
Stratum Port3333
Stratum Userbc1qyouraddress.bedroom
Passwordx
Choose your mining region
Showing Europe, Lithuania (main server).
Changing the location only changes the address shown above. Copy it into your miner settings and restart or reconnect the miner. Miners already connected stay where they are. Every server mines the same pool, with the same payouts.
Browser ping, measured live from this page
Europe, Lithuania...
North America, Chicago...
Asia, Jakarta...
This measures your browser connection, not your miner or the full relay-to-pool path.

If your firmware has one combined pool field, enter stratum+tcp://stratum.directpool.io:3333. If it has separate host and port fields, enter stratum.directpool.io and 3333. Password x is a connection field, not a wallet password or seed phrase.

How do I save and check the settings?

  1. Open the miner's web interface at the local IP shown on its screen. For first-time WiFi setup, follow the Lucky Miner setup guide.
  2. Replace the factory pool host, port and username. Check every configured pool, not just the first one.
  3. Save, restart the miner and let it reconnect. Check that accepted shares increase rather than relying only on the local hashrate display.
  4. Open your miner dashboard using the address before the dot. Worker names identify machines, not separate wallets.
Screenshot placeholder: Lucky Miner pool settings showing host, port, Bitcoin-address username and password x. Interface labels vary with vendor firmware. No screenshot is presented as an actual device capture.

What should I put in the fallback pool?

A fallback is tried when the primary connection fails. If your firmware supports it, configure a second independently operated Bitcoin SHA-256 pool with its own verified connection details and your own BTC address. A different DirectPool region can help with a network route problem, but it is not an independent backup for the underlying pool.

Do not substitute the solo port as an equivalent fallback without understanding the payout change. DirectPool BTC solo uses port 3338, while 3333 is shared PPLNS. Read Lucky Miner solo versus pool mining before choosing.

Why am I connected but not getting shares?

Check accepted shares and the last-share time, WiFi stability and the exact username. A connected socket does not prove useful work is being accepted. Follow the Lucky Miner troubleshooting checklist if rejects keep rising.

Find all mining guides, compare chances with the live odds calculator, or connect to DirectPool.

Q

Questions

Is the worker name my Bitcoin address?
The username starts with your own Bitcoin address. An optional suffix such as .lucky01 labels the machine; do not replace the address with a nickname.
Should the host include stratum+tcp://?
Use stratum+tcp://stratum.directpool.io:3333 in a combined URL field. With separate fields, use stratum.directpool.io and port 3333. Follow the field format supported by your firmware.
Are the LV07 settings different?
DirectPool host, port, username format and password are the same for LV06, LV07 and LV08. Vendor firmware can display different field names.
S

Sources

  1. DigLucky: Lucky Miner setup fieldshttps://diglucky.com/luckyminer-lv08-setup-guide, checked 2026-11-11
  2. DirectPool: current connection detailshttps://directpool.io/#connect, checked 2026-11-11

Miners in this guide

Read next